Alkalinity Plus
100% Sodium Hydrogen Carbonate
Increases total alkalinity level to help buffer pool water
- Proper total alkalinity is a critical component of water balance.
- Low total alkalinity can cause pH levels to fluctuate.
- Excessively high total alkalinity can cause pH to resist adjustment, cloudy water and possible scale
- For use in pools, spas, or hot tubs
To place a wholesale order, fill out our dealer application form or call (317) 736-6868.
Active Ingredient:
100% Sodium Hydrogen Carbonate
Chemical Type:
Pool Balancer
Bucket Net Weight:
10 lb or 25 lb
Directions For Use
Read entire label and use in accordance with precautionary statements and directions for use. Buyer assumes all responsibility for safety and use not in accordance with precautionary statements and directions for use.
Before Adding This Product To The Pool:
- Measure total alkalinity of pool water with a test kit or strip.
- If total alkalinity is below 80 ppm, add this product using the dosage chart below. 1 lb. = approximately 1.75 cups.
How To Add This Product To The Pool:
- With the circulation pump running, slowly add this product directly into skimmer. Allow circulation system to operate for at least 24 hours. If added into skimmer, do not mix different chemicals directly in skimmer.
- Retest the total alkalinity level after 4 hours.
- Repeat treatment as necessary until alkalinity is in the acceptable range of 80 to 120 ppm.
